There’s nothing more satisfying than soaking in clean, warm water in your hot tub this winter. You may use hot tubs more frequently this cold season, but you must not forget to keep the hot tub water clean.
Cloudy water is just one recurrent issue that most hot tub owners complain about. If you experience the same problem, then you’re in the right place. In this article, we’ve compiled effective tips on how to avoid and treat cloudy water in your hot tub.
Essential Tips on How to Avoid Cloudy Hot Tub Water
1. Test and balance your water chemistry.
One of the main reasons why hot tub water gets cloudy is that the water is not balanced. However, it is important to note that it is not the only cause.
Now, many people immediately add chemicals to restore the balance of the water without even testing the water first. This is a common mistake that you should avoid.
First, you didn’t know if unbalanced water is the reason. Second, you didn’t know the proper level of the water; thus, you might use the wrong chemical.
So, what do you do first? Test the water of course. You can easily do so using a test strip. After that, you can then add the right balancer chemical needed. To raise the pH, use sodium carbonate or sodium bicarbonate (if alkalinity is low). On the other hand, use muriatic acid to lower the pH level.
2. Use a clarifier.
What is a Clarifier? It is a special treatment for the hot tub or pool water. This works by clotting the small particles and other contaminants that cause the water to get cloudy.
The purpose why these small particles need to be thickened together is so that they will be big enough to be screened out by the filter.
Make sure to clean and rinse your filter after using a clarifier to ensure that none of these particles are clinging on the filter.
3. Invest in a good filter.
The main function of a hot tub filter is to block debris, dirt, and other particles that can cause the water to get cloudy. Hence, if your filter performs poorly, then you have a high chance of experiencing cloudy water.
Also, filters need regular cleaning. Just because their job is to maintain clean water doesn’t mean that they don’t need cleaning themselves. If the filters have too much dirt on them, this can be a factor of why they no longer function properly.
4. Shower before using the hot tub.
This tip is a common knowledge, but some people just forget or tend to overlook the importance of showering before soaking in the hot tub.
You use a lot of body and hair care products every day. Therefore, it is most likely that you’ll bring these chemicals with you if you dip in the hot tub without showering.
Don’t use any soap before using the hot tub. Also, rinse your clothing with warm water to remove any detergent residue from the clothes.
5. Change your hot tub water regularly.
It is advisable to change water as scheduled, especially if you use your hot tub regularly. The rule of thumb goes:
Total gallons of water your hot tub can hold ÷ 3 ÷ the number of bathers = how often you should change the water.
Conclusion
Don’t let cloudy water become a hindrance for you to enjoy your hot tub. Keeping the water crisp and clean is easy; you just have to find the time to do it consistently.
Remember these 5 tips on how to treat and prevent cloudy hot tub water!
Leave a Reply