How to Raise The pH Levels in a Hot Tub

In order to get the ultimate relaxation experience in your hot tub, you must ensure that it is working properly and that the water is clean and hygienic.

If you are having issues with low pH in your tub, continue reading this brief guide and learn how to fix it.

What Causes Low pH Levels in Hot Tubs

Before you get the best solutions on how to raise pH in hot tub, it is crucial that you understand why a decline in pH levels happens in the first place.

Here is a list of the probable causes of low pH in hot tubs.

• Natural Contaminants: These include dust, mulch, grass, food and drinks, sweat, insects, etc.
• Frequent Usage: The more a hot tub is being used, the more it gets contaminated with foreign materials which leads to decreased pH levels.
• Acid Rain: Outdoor hot tubs are often exposed to rain. Acid rain, in particular, is a huge factor that leads to low pH levels in hot tubs.
• Cleaning Products: The chemicals found in cleaning products that you use to clean your tub can cause the pH levels to go down.

Two Easy Methods to Increase pH Levels in Your Hot Tub

#1. Using Sodium Carbonate

Using Sodium Carbonate, also known as Soda Ash, is a quick and easy DIY method to fix low pH issues in your hot tub. Here’s how you can use it:

Step 1:Turn off the tub pump and test the water using a pH test kit or test device.

Step 2: Get the right amount of soda ash to put in your tub. Ideally, you should use 1 tablespoon of soda ash to put into 450liters of water.

Step 3: To avoid clouding your hot tub water, dilute the soda ash first in a bucket of water before mixing it in the tub.

Step 4: Turn on the tub’s water pump and leave it for an hour.

Step 5: Test the water again using your pH tester. If the pH level isn’t high enough, repeat the process.

#2. Using Sodium Bicarbonate

Sodium Bicarbonate, commonly known as baking soda, is something you probably already have at home. Using baking soda is another easy quick fix to the pH dilemma in your hot tub. Follow the steps below on how to use it in your tub.

Step 1: Turn off the water pump and test the water using a pH testing kit or device.

Step 2: Get the right amount of baking soda to mix in your tub. Generally, the same measurement with the soda ash applies to this method; 1 tablespoon of baking soda for every 450 liters of water.

Step 3: For easy dispersion, mix the baking soda first in a bucket of water before mixing it into the water in your hot tub.

Step 4: Turn on the water pump and leave it for an hour.

Step 5: Retest your tub water and repeat the entire process if the pH level is still significantly low.

Conclusion

Now that you know how to raise pH in hot tub or Jacuzzi, you can now plunge into your tub confidently and know that it is hygienic and totally safe.

If you don’t have a hot tub at home yet, it is about time you invested in one of the best hot tubs on the market today.